Showing 15 products

Arax Wet Grip Glove


Arax Knit Technology with EN388 Cut Level D Black nitrile sand dip for superior grip in wet or greasy conditions Form fitting design that emulate individual hand contour for the most comfortable fit Contact heat resistant to 100'C Anti-static, breathable liner Available sizes - 7, 8, 9, 10, 11

ESKA Super Mars Plus Level 3 Leather Glove


ESKA Super Mars Plus Level 3 Leather Glove • Special water / oil resistant, non-shrinking, non-flammable, leather / Kevlar outer. • New exclusive Gore Crosstech X-TRAFIT moisture barrier. • Liner resistant to blood and body fluids (ISO16604), resistant to chemical penetration in accordance with AS2161.6 and ISO 13994 / NFPA 1951. • 15% dexterity improvement for better grip. • New fibreglass knuckle protection pad; reduces steam and compression burns. • New impregnated Kevlar palm wear pads and thumb pad. • Three dimensional pattern for comfort fit. • Washable to 40ºC. Follow instructions on the label. •  Sizes XXS - XXXL  

Firemaster Fusion - Level 3 Leather Glove EN


Firemaster ® Fusion is the style selected by both the UK national clothing contract (ICP) and London Fire Brigade as their glove of choice. Made in a full inseam design with curved fingers to enhance the natural shape of the hand, this glove provides protection as well as comfort and dexterity for the wearer. As with all the gloves in this range, the outer shell is constructed from PYROHIDE® grain leather using a heavier weight on the back of the hand for increased heat resistance in this location. Synthetic coated Kevlar patches on the palm, thumb and roll top finger tips increase the contact heat and abrasion resistance in these locations. The outer is completed with a Nomex® / Kevlar® knitted wristlet cuff which contains traces of elastane for extension and recovery properties. A three layer laminated Gore CROSSTECH® pathogen resistant glove insert offering the ultimate in barrier protection is bonded to a Kevlar with glass-fibre seamless knitted lining to provide superior lining retention. Components:• Outer: 100% Pyrohide® Grain Leather• Interlining: Crosstech® Membrane• Lining: 100% Kevlar® with glass-fibre• Cuff: 54% Kevalar®, 44% Nomex®, 2% Elastane• Thread: 100% Nomex®• Patches: 100% FR Neoprene coated Kevlar® Colour: Black with Red Trim Sizes Available:• XXXS  (=  size 5)• XXS    (= size 6)• XS      (= size 7) • S        (= size 8)  • M       (= size 9) • L        (= size 10)  • XL      (= size 11) • XXL    (= size 12)  • XXXL  (= size 13)

Firepro 2 - Level 2 Structural Firefighting Gloves


Outer: 100% Hi-Wear leatherLining: Cut and sewn moisture/pathogen laminated liner/insert Cuffing: Fire resistant double ribbed cuff, complete with wrist protector Thread: Sewn with 100% 3 ply Kevlar thread throughout and all high wear seams are double reinforced Trim: 3M reflective Scotchlite binding around the cuff enhances visibility in low light and night conditions Gloves are washable Accredited to both AS2161.6 and EN659  

FirePro Wildfire Level 1 Glove


A light durable glove affording the wearer superior protection from wildfire hazards. Designed specifically for Australian conditions, the Firepro Wildfire (Wildland) Level 1 glove has been developed with substantial fire service involvement as a Type 1 Glove accredited to the Australian Standard AS2161.6 for Wildfire Gloves. The glove has been well received by operational personnel. The Firepro Wildfire (Wildland) Glove has been widely adopted as the operational glove of many leading fire fighting organisations within Australia. Body: Hi-wear grain leather Cuff: An approved and FR tested blend of Australian Flame Resistant material The cuff design restricts the entry of embers or foreign particles through the glove entry Thread: Double sewn with FR 3 ply  

Firewall L3 Structural Gloves


Firewall L3 Structural Gloves Hi-Vis lime yellow water repellant A grade leather outer 'rigger' style design 3M reflective strip on the back of the hand Re-inforced palm and thumb leather strip Porelle breathable moisture barrier Kevlar knit cuff with leather wear protector Kevlar thermal liner Kevlar stitching Excellent dexterity Sizes available XS to XXL 35cm glove length Complies to AS2161.6 Level 3  

Hatch PPG2 ArmorTip Puncture Resistant Gloves


Hatch PPG2 ArmorTip Puncture Resistant Gloves These puncture and cut-resistant gloves have been tested for puncture resistance under the NIJ test protocol to the highest levels of protection. Our exclusive ArmorTip design provides cut and puncture protection where 80-90% of needle stick injuries occur, while keeping the much needed flexibility for maximum performance. This design offers optimum protection from potentially deadly needle sticks and cuts. Exclusive ArmorTip System Palm is covered in suede synthetic leather panels and the leading edges of the fingertips Offers optimum protection on the side Neoprene and Spandex laminated back with hook and loop closure flexes and breathes to provide maximum comfort and proper fit

Ninja Razr Diamond Cut 5


The Ninja® RAZR Diamond 5 is a highly sophisticated cut resistant glove in the Ninja RAZR range. These gloves are made with Dyneema® Diamond technology fibre which is the world''s most advanced cut resistant fibre; 40% lighter than aramid fibres and offers a 200% improvement in cut resistant performance over gloves made with standard Dyneema®. The Ninja® RAZR Diamond 5 is a lighter 15 gauge material, cooler, more flexible and lasts longer than any other cut resistant glove Features: Coating is soft PU coating offering superb flexibility and comfort. High cut performace 200% improvement in cut resistance performance when compared to gloves made with standard Dyneema® fibre. The dramatically thin fibre of Dyneema® Diamond technology allows for increased cut resistance without the fibreglass discomfort. It allows for better feel and control, and radiates heat away from hands for all-day comfort. Made to AS/NZS 2161.3:2005 EN388:4543 Applications: Steel industry Sheet metal fabrication Automotive industry Glass & paper handling Heavy metals handling Plastic, carpet & cardboard trimming & cutting Machine Shops

$19.47 AUDInc. GST

Pro Choice Arax Dry Grip Glove


ProChoice® Arax® Latex Crinkle Dip On 13G Liner Arax Knit Technology with EN388 Cut Level D Black latex crinkle dip for superior grip on smooth or dry surfaces Form fitting design that emulate individual hand contour for the most comfortable fit Contact heat resistant to 100''C Anti-static, breathable liner

$14.00 AUDInc. GST

Pro Choice Hi-Vis Orange Glove Holder


Pro Choice Hi-Vis Orange Glove Holder

$9.95 AUDInc. GST

PVC Double Dipped Gloves - Short Cuff


Double dipped with sand finish for improved grip and increased resistance to oil and grease 27cm for hand protection Jersey lined for comfort and sweat absorption One size fits all Uses - Automotive, fisheries, pharmaceutical, petroleum refining, forestry, general purpose, maintenance, manufacturing

Riggamate Revolution D Leather Gloves


Glove-quality leather provides good feel, protection and durability. Tough cowhide offers protection against oil & water. Pigskin, with its characteristic pores, offers breathability in a soft, hard wearing glove where moisture protection is not important. Applications: Roadworks Rigging Gardening General purpose handling Construction Mining Available in sizes: S, M, L, XL, 2XL, 3XL

$16.35 AUDInc. GST

Ringers Long Cuff Extrication Glove


Extrication (Long Cuff) Uses:• Extrication, First Response• Search and Rescue Teams• Heavy Equipment Operation Features:• Tough Armortex® reinforced index finger and thumb• Tough Armortex® Puncture & Abrasion Resistance• Premium Synthetic Leather palm and finger material• Elastic Cuff keeps out Glass & Debris• Reflective Schoeller® padded knuckle• Anatomically designed palm pads• Non-reflective Armortex® knuckles

Rope Rescue Glove - Ring 353


Uses:• Emergency Response, Rope Rescue• Mountain Rescue• Belaying• Multi Purpose Features:• Machine Washable• Air Dry• Padded Palm• Glove will not shrink, stretch or harden• Incredible fingertip dexterity allows knot untying without removing gloves• Kevlar Reinforced stitching and hidden seams for extreme durability   and maximum wear.• Unique gel padding rope control channel• Patented SuperCuff design• Pittards Armortan palm• Premium synthetic leather palm and fingertip patches    

Supreno Nitrile Powderfree Gloves - Bx-100


Supreno® SE gloves are the best combination of strength and durability in an allpurpose yet comfortable synthetic glove. Recommended for use when strength and protection are of great importance and when day to day hazards require the best combination of durability and security. • Sizes Available: XS, S, M, L, XL• Gloves per box: 100• Length: 245mm• Colour: Blue• Glove Exterior: Texured Fingers

Showing 1–17 of 17 results