Light & compact Fixed cheeks Aluminium sheave Self lubricating bush Maximum rope size 13mm Rating: 22kN Weight: 90 g Colour: Orange Individually tested to 5kN Meets CE Standard
The Aztek Omni pulley blocks and sheaves are machined from solid aluminum, feature swivel connection points, and utilise high efficiency bearings. Note: The Slate blue pulley includes the AZTEK quick release pin Weight: 226G Sheave: Aluminum Sheave Tread Size: 26 x 10mm Rated: 43kN
Ideal for mountain rescue, swiftwater, ski patrol, tower work or other technical uses, where equipment weight is a significant consideration, these lightweight, full-strength Prusik-minding pulleys feature extremely low-profile stainless steel hardware to reduce snagging on rocks, roots, and uneven surfaces. By machining the side plates, the thickness of the metal can be optimized to maximize the strength-to-weight ratio, a process that cannot be done with the traditional bent metal side plates. The unique axle assembly delivers a smooth side plate and impressive strength. The aluminium sheave is mounted on sealed ball bearings for high efficiency. Ideal for small block-and-tackle kits. Note: Not compatible with 12.5mm (1/2") or larger ropes. Type: Single Colour: Sand Sheave Tread Size: 25mm x 11mm Weight: 94g NFPA Rating: General Use
Built workhorse tough to deliver years of dependable service, these HD (Heavy Duty) Pulleys are loaded with enhanced features including Large high-efficiency anodized aluminum sheave High-strength sealed bearings that minimize loss of mechanical advantage and will deliver optimum performance haul after haul Side plates constructed of machined aircraft-grade aluminum, with smooth rounded edges to minimize rope wear Wide attachment point that supports multiple rescue-size carabiners PMP (Prusik-Minding Pulley) bottom shaped for maximum efficiency with Prusik hitches and also works well with mechanical rope-grabs Item: 300442 Product Weight: 605g Sheave Tread Size: 57 x 13mm Pulley Dimensions: 16.5 x 9.5cm 3 Sigma MBS: 56kn
These compound or complex system workhorses feature precision sealed ball bearings to minimize loss of mechanical advantage. The large carabiner hole supports multiple carabiners, and the smooth, rounded edges on the high-strength aluminum side plates minimize rope fraying. The bottom is shaped for maximum efficiency with Prusik hitches but also works well with Gibbs-type ascenders. Large anodized aluminum sheaves provide efficiency, and low-profile axle fasteners reduce snags when the pulley is moving. Working-At-Height / Industrial Rope Access / Technical Rope Rescue Working at height requires reliable, quality equipment. The ProSeries® Pulleys can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards they fall under. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified. Type: SingleColour: RedSheave Tread Size: 95mm x 13mmWeight: 850gNFPA Rating: General Use
Ideal for mountain rescue, swiftwater, ski patrol, tower work or other technical uses, where equipment weight is a significant consideration, these lightweight, full-strength Prusik-minding pulleys feature extremely low-profile stainless steel hardware to reduce snagging on rocks, roots, and uneven surfaces. By machining the side plates, the thickness of the metal can be optimized to maximize the strength-to-weight ratio, a process that cannot be done with the raditional bent metal side plates. The unique axle assembly delivers a smooth side plate and impressive strength. The aluminum sheave is mounted on sealed ball bearings for high efficiency. Ideal for small block-and-tackle kits. Note: Not compatible with 12.5mm (1/2") or larger ropes. Type: Double Colour: Sand Sheave Tread Size: 25mm x 11mm Weight: 159g Rating: 36kN
Designed for 1/2-inch Life Safety Rope
Ideal for industrial applications as well as many rescue operations, the CSR (Confined Space Rescue) Pulley uses our proprietary locking system that eliminates a toothed cam or Prusik, so it can be released while under load. Its integral swivel reduces torque by aligning the pulley with the load, thereby increasing efficiency and safety. Optimized for 1/2-in (12.5-mm) rope, the CSR Pulley has high-strength aluminium side plates, sealed ball bearings, and anodized aluminium sheaves.
This lightweight, full-strength, Prusik-minding pulley is ideal for mountain rescue, swift water, or other technical teams where equipment weight is a significant consideration. By machining the side plates, the thickness of the metal can be varied to maximize the strength-to-weight ratio, a process that cannot be done with traditional bent metal side plates. Sealed ball bearings provide high efficiency and aluminum side plates protect the rope. An extremely low-profile stainless steel axle assembly reduces snagging on rocks, roots, and uneven surfaces. Designed for lifeline up to 13mm (1/2") in diameter. Working-At-Height / Industrial Rope Access / Technical Rope RescueWorking at height requires reliable, quality equipment. The Rescue Pulley can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards it falls under. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified. Type: Single Colour: Burgundy Sheave Tread Size: 38mm x 13mm Weight: 145g
This lightweight, full-strength, Prusik-minding pulley is ideal for mountain rescue, swift water rescue, or technical teams where equipment weight is a significant consideration. By machining the side plates, the thickness of the metal can be varied to maximise the strength-to-weight ratio, a process that cannot be done with traditional bent metal side plates. Sealed ball bearings provide high efficiency, and aluminium side plates protect the rope. An extremely low-profile stainless steel axle assembly reduces snagging on rocks, roots, and uneven surfaces. Designed for lifeline up to 1/2 inch (13mm) in diameter. Available in Single or Double versions. Product Weight: 249g Sheave Tread Size: 38mm x 13mm Type Double Colour: Red NFPA Rating: General Use 3 SIGMA MBS 50 KN (11,240 LBF)
Multi Point Pulley is designed for use with high ropes activities eg. flying foxes and horizontal systems Multi attachment points, for securing back ups and lowering off systems Suitable for ropes between 8 to 12mm in diameter Premium quality high speed sealed bearings Innovative drop resist hooks prevent the pulley from leaving the cable should it be dropped during install or removal Low wear stainless steels wheels to minimise cable damage and deposits Stainless steel body and wheels Marked with individual serial number and batch numbered Independently tested by a NATA test facility to meet international standards for pulleys DIN EN 12278 (2007-08) Complies with Australian Standard 1891.2 fall arrest systems and devices
Gemini is a compact double pulley that sets up progress capture systems of high mechanical advantage Special side plates designed for use with prusik friction hitch in progress capture systems Parallel mounted sheaves and auxiliary attachment point for creating different types of hauling systems Sheave mounted on sealed ball bearings for excellent efficiency Compact and lightweight Specifications: Rope compatibility: 7 to 11mm Sheave diameter: 25 mm Efficiency: 91 % Maximum working load: 2 x 1,5 kN x 2 = 6 kN Weight: 135 g Certification(s): CE EN 12278, NFPA 1983 Technical Use
Petzl's KOOTENAY is a knot-passing pulley that allows passage of joining knots. The large diameter sheave mounted on sealed ball bearings ensures excellent efficiency. Description: High clearance rope channel allows passage of joining knots (long raise or Tyrolean traverse on two ropes) Large diameter sheave mounted on sealed ball bearings for excellent efficiency Locking pins on the sheave allow pulley to be used as an anchor Specifications: Rope compatibility: 8 to 19mm Sheave diameter: 76mm Max working load: 5 kN x 2 = 10 kN Weight: 1390 g Height: 26 cm Certification(s): CE EN 12278
MICRO TRAXION is an ultra-compact, extremely light progress capture pulley that is exceptionally efficient. The cam can be locked in open position so the device can be used as a simple pulley. Description: Ultra-compact and lightweight Versatile:- toothed cam with self-cleaning slot optimises performance under any conditions: frozen or dirty ropes...- may be used as simple pulley by locking the cam in the raised position Aluminium sheave mounted on sealed ball bearings for excellent efficiency Specifications: Rope compatibility: 8 to 11 mm Sheave diameter: 25 mm Efficiency: 91 % Maximum working load - pulley: 2,5 x 2 = 5 kN Maximum working load - rope clamp: 2,5 kN Weight: 85 g Certification(s): CE EN 567, EAC Material(s): aluminum, steel, stainless steel, nylon
MINDER is a high-strength pulley designed for rescue professionals to set up progress capture systems. Description: Special side plates designed for use with a prusik friction hitch in progress capture systems Large diameter sheave mounted on sealed ball bearings for excellent efficiency Accepts up to three carabiners to facilitate use Specifications: Rope compatibility: 7 to 13 mm Sheave diameter: 51 mm Ball bearings: yes Efficiency: 97 % Maximum working load: 4 kN x 2 = 8 kN Weight: 295 g Certification(s): CE EN 12278, NFPA 1983 General Use
The MINI compact pulley offers a lightweight solution for setting up progress capture systems. Description: Special side plates designed for use with a Prusik friction hitch in progress capture systems Sheave mounted on sealed ball bearings for excellent efficiency Compact and lightweight Specifications: Rope compatibility: 7 to 11 mm Sheave diameter: 25 mm Efficiency: 91 % Maximum working load: 2,5 kN x 2 = 5 kN Weight: 80 g Certification(s): CE EN 12278, NFPA 1983 Technical Use