Stretchers and Bridles

Showing 15 products

Aussie Scoop Stretcher

HAR Stretcher14

The DHS Aussiscoops is designed specifically for dealing with patients in-situ and to avoid log rolling. The Aussiscoop features a low profile design, multiple attachment points and simple to use lock and release mechanisms.  The unit is CT scan compatible and X-Ray translucent. Length: 1785-2020mm Width: 445mm Weight: 8kg SWL: 160kg

CMC Basket Stretcher Shield Plus

HAR Stretcher031

Molded of thick Lexan

Protect your patient from further trauma during stretcher evacuations and carryouts with the Litter Shield Plus. A patient in a stretcher has a very limited ability to protect their face, head, and neck. Since its inception, the CMC Rescue Litter Shield has made several "saves" by deflecting falling rocks away from patients's heads. The shield provides protection from falling rocks and debris, inclement weather, and brush without compromising access to and visibility of the patient's head. The Litter Shield Plus is taller to provide more room for a patient on a backboard or litter insert, and to help reduce the “closed-in” feeling experienced by some patients. The mounting bracket eliminates the need for a railing clamp on the stretcher and allows the shield to fit most stretchers. Molded of thick Lexan, the Litter Shield offers impact resistance with the clarity and weather-ability of glass. Patient comfort is increased due to the reduced need for other head and face protective equipment.

CMC Litter Pack

HAR Stretcher25

Designed to hold litter harnesses, tender straps, web, protective eyewear, latex gloves, or anything else you need to go with your litter. This pack has convenient hook-and-loop straps that allow the bag to be connected to the litter rails. Made from the same tough 1,000-denier CORDURA® nylon as the Rope Bags, it also features a handle and carabiner loops. Weight:  354g Dimensions: 51cm x 18cm Colour:  Orange Volume:  18L

CMC ProSeries Stretcher Lifting Bridle

HAR Stretcher0111

This fully adjustable litter harness intended for use with a rigid litter features parachute buckles on each of the four legs.

This fully adjustable litter harness intended for use with a rigid litter features parachute buckles on each of the four legs. This allows them to be adjusted independently, so the litter can be quickly and easily set at the best angle for condition or patient comfort. A heavy duty O-ring is used for the top tie-in point and a 3m tender line (CMC Static-Pro Lifeline) and a nylon storage bag are included. ** Carabiners not included. The ProSeries® Litter Harness is now certified to NFPA 1983, Auxiliary Equipment,General Use, 67 kN MBS. • Product Weight:  2.3kg• Colour: Black• NFPA Rating General Use• 3 Sigma  MBS 67 KN (15,061 LBF)

CMC Rescue Stretcher Lifting Bridle

HAR Stretcher011

Designed for high-angle rescues where minimum weight is important.

Designed for high-angle rescues where minimum weight is important, such as backcountry rescues or air operations, this harness has legs that adjust with a cam buckle for easily placing the patient in the most comfortable position. Color-coded legs aid fast set-up. The system ropes can be attached directly to the 54 kN (12,139 lbf) Delta Quick Link (included) or connected in with carabiners. A 3m - 12.5 mm tender line (CMC Static-Pro Lifeline) and nylon storage bag are included. ** Carabiners not included. • Product Weight:  1.4kg• Colour: Red / Blue• Strength Rating:  32 KN (7,194 LBF)

DHS Basket Stretcher

HAR Stretcher13

This super strong rotation moulded lightweight plastic pan is suited for land retrievals and vertical and horizontal lifting. Features: Yellow high-density polyethylene patient shell supported and surrounded by a powder coated, monocoque design aluminium frame. Full length underside runners provide additional support and assists when dragging over uneven terrain. A fully exposed outer rail provides good handling and attachment options. Suitable for vertical or horizontal lifting. Ideal for industrial, mining or construction use Restraints not included. Specifications: Length: 216cm Width: 63cm Height: 24cm Weight: 13kg Load Rating: 300kg    

Ferno 71 Once Piece Basket Stretcher

HAR Stretcher03

The Ferno 71 Basket Stretcher is constructed of a high density polyethylene shell supported by a permanently attached heavy-duty aluminium frame. Features: Supplied standard with four two-piece quick release patient restraints  Easily replaceable mattress is attached inside the stretcher for patient comfort Chemical, UV, rust and corrosion resistant Moulded-in runners and handholds make it easy to handle Moulded runners and handholds Brass grommets strategically located for quick use with the Ferno Adjustable Lifting Bridles                          Product Specifications: Length - 218cm Width - 61cm Height - 19cm Weight - 11kg Load Limit - 272kg  

Ferno 71S Two Piece Basket Stretcher

HAR Stretcher030

The Ferno 71-S two piece Basket Stretcher has the same features as the one-piece Ferno 71 Basket Stretcher but separates in half for compact storage or backpacking to a rescue site. Features: Supplied standard with four two-piece quick release patient restraints  Easily replaceable mattress is attached inside the stretcher for patient comfort Chemical, UV, rust and corrosion resistant Moulded-in runners and handholds make it easy to handle Moulded runners and handholds Brass grommets strategically located for quick use with the Ferno Adjustable Lifting Bridles                          Product Specifications: Length - 218cm Width - 61cm Height - 19cm Weight - 11kg Load Limit - 272kg Additional Features:  Stretcher halves store nested together Stretcher is quickly assembled and secured with pins

Ferno Adjustable Lifting Bridle BRB-TLB

HAR Stretcher06

The Ferno Adjustable Lifting Bridles are designed for use with the Gazelle and Titan Basket Stretchers and is available with a variety of steel carabiner options. Each of the four arms are adjustable and quickly set for individual rescue requirements. Manufactured from heavy duty UV resistant webbing rated at 2520kg (25kN) with hardware wear strips and bright orange tabs for identification of the adjustment buckles. BRB-TLB has a working load limit of 315 kg. The BRB-TLB (24mm screw gate carabiners) is suitable for the Traverse Titan and Gazelle Stretchers

Ferno Adjustable Lifting Bridle BRB-TLB-TX11S

HAR Stretcher131

The Ferno Adjustable Lifting Bridles are designed for use with the Gazelle and Titan Basket Stretchers and is available with a variety of steel carabiner options. Each of the four arms are adjustable and quickly set for individual rescue requirements. Manufactured from heavy duty UV resistant webbing rated at 2520kg (25kN) with hardware wear strips and bright orange tabs for identification of the adjustment buckles.  BRB-TLB-TX11S has a working load limit of 315 kg. The BRB-TLB-TX11S (65 mm large screw gate carabiners) is suitable for the Ferno 71 Series stretchers  

Ferno Faststrap Restraint System

HAR Stretcher011111

This ten-point, five-strap system quickly and effectively secures patients to backboards and other devices.

This ten-point, five-strap system quickly and effectively secures patients to backboards and other devices. Color-coded straps are constructed of nylon with hook-and-loop closures. The Fastrap is adjustable from pediatric to adult, and includes a strap for the patient’s wrists. Weight: 907g ** Backboard not included.    

Ferno LifeSaver Rescue Stretcher

HAR Stretcher17

The Ferno LifeSaver Stretcher is a modern version of the traditional Neil Robertson Stretcher and is designed to be both quick and easy to use in horizontal and vertical lift situations where minimum bulk is a consideration. The LIfeSaver Rescue Stretcher comes complete with integral leg and torso flaps that envelope the patient like a traditional corset which is complimented by a simple head restraint, five built-in patient restraints and a long foot strap. It is fitted with various carry handles and stainless steel rings that are used at the foot and head end for guiding and lifting the stretcher in vertical applications.  The compact, roll-up design makes storing and transporting the stretcher easy. The LifeSaver Rescue Stretcher is made with full length 5 mm ribs interwoven in tough 1000 denier, high tenacity nylon fabric to provide full body splinting in a very narrow patient package.  Also available in military colours. Product Specifications:• Length - 153cm• Width - 104cm• Height - 3cm• Weight - 5kg (full system0• Load Limit - 159kg

Ferno Res-Q-Mate Rescue Stretcher c-w Bridle

HAR Stretcher20

Ferno’s Res-Q-Mate Rescue Stretcher is specifically designed for rapid evacuation in building collapses, mine rescue, helicopter and confined space rescue. The rigid frame also provides an ideal platform to evacuate suspected spinal injuries.  The Torso and leg flaps comfortably wrap around the patient while a head restraint and four adjustable, colour-coded, chest, thigh and lower leg straps assist in securing the patient. Additional restraint is provided via an exterior v-shaped arm strap and a long foot end strap designed for a  figure-of-eight configuration. There are also six built-in carry handles that provide rescuers with various carrying options. Constructed of high grade stainless steel and quality synthetic materials the Res-Q-Mate is impervious to oil, water, grease and other petroleum products making it easy to clean and also resistant to rot and corrosion. When not deployed the unit folds compact and sits neatly inside a heavy-duty reflective backpack.  Each Ferno Res-Q-Mate Rescue Stretcher comes complete with a four-point lifting bridle, 50 m tag line system, adjustable head restraint, head pillow and reflective backpack.

Ferno Universal Head Immobiliser

HAR Stretcher01111

The Ferno Universal Head Immobiliser is simple to use, lightweight and easy to clean. Composed of two plastic coated, closed-cell foam head supports, a universal attachment base and two durable head straps. The head supports can be used on standard backboards, or reversed for use on the Ferno EXL or Saver Scoop Stretcher. Key Features: Unique head strap is designed to conform to patient’s forehead Large ear holes for monitoring the patient’s ear canal Minimal interference with X-ray, MRI or CT scan procedures Waterproof plastic coating makes it easy to clean Compatible with all flat backboards as well as Ferno Scoop Stretchers  

Half Sked Patient Drag

HAR Stretcher05

Ideal for tactical teams that need to secure and rapidly extricate an injured person, the Half Sked allows rescuers to bend the patient at the hips, allowing greater flexibility to turn corners in caves or confined spaces. It uses two-inch-wide chest and leg straps with side-release buckles to package the patient quickly and securely, particularly valuable if the patient must be immediately evacuated from a high risk area. The Half Sked is made of the same durable material as the Sked stretcher, but is only half as long. The patient is secured in the Half-Sked with sewn-in 50mm webbing straps with fastex style double adjustable buckles, and patients can be extricated from the tightest of confined spaces. Unlike the Sked® stretcher, the Half Sked allows the patient to bend at the hips, allowing greater flexibility to turn corners. The Half Sked should not be used as a hoisting or immobilization device, but for cost effective extrication from the most demanding confined spaces there is nothing quite like it anywhere.  

Showing 1–26 of 26 results

Top