38mm BSP Inlet and Outlet
Large, easy to read, and removable metering dial with infinite settings between 0% and 6%. Detents at 1/4, 1/2, 1, 3 and 6% Rated to 125 gpm (475 lpm) at 200 psi (14 bar) inlet pressure Works effectively with nozzles rated from 50 to 100 psi (3 to 7 bar). 1-1/2" (38 mm) or 2 1/2" (65 mm) swivel inlet x 1 1/2" (38mm) male 30" pickup hose standard on 125 gpm (475 lpm) eductors, 48" hose optional
65mm BSP Inlet and Outlet
Large, easy to read, and removable metering dial with infinite settings between 0% and 6%. Detents at 1/4, 1/2, 1, 3 and 6% Rated to 250 gpm (950 lpm) at 200 psi (14 bar) inlet pressure Works effectively with nozzles rated from 50 to 100 psi (3 to 7 bar). 2-1/2" (65 mm) full-time swivel inlet x 2 1/2" (65 mm) male threaded outlet 48" pickup hose standard on 250 gpm (950 lpm) 65mm BSP inlet and outlet
• Provides air-aspirated foam with expansion ratios up to 12:1 with AFFF• Flows: Up to 30 gpm (115 lpm)• Compatible with: 1" (25 mm) Assault & Turbojet Nozzles manufactured since 2000
Hi-Combat series of low expansion foam branchpipes, designed with long range performance in mind.
The Angus series of low expansion foam branch pipes has been designed with long range performance in mind. There are three basic models with nominal foam solution through puts of 225,450 and 900 litres/mm at 7 bar. Self inducing models are available in the 225 and 450 litre/minute versions. All models produce finished foams of nominal expansion 10 : 1 and give foam streams of an exceptional range. To get the bestresults from these branch pipes we recommend use with either FP70 Plus Fluoroprotein foam or Alcoseal AR-FFFP multi-purpose foam concentrate. The /SH models are fitted with a self-inducing foam inlet connection,foam concentrate pick-up tube and piercer.
Hi-Combat Portable Foam Uniductor, designed for quick and reliable response to attack duties
Portable Foam Uniductor Hi-Combat Portable Foam Uniductors High Standard of Accuracy Corrosion Resistant Efficient and Accurate Description Hi-Combat Portable Foam Uniductor, when matched with Angus Hi-Combat Foam branchpipes or nozzles, provides the simplest possible means of getting foam to the fire where it is needed. They can be placed near a portable pump or hydrant outlet, minimising manpower requirements and leaving the firefighter to concentrate on effective application of the foam to control the fire situation. The devices are venturi-type inductors designed for quick and reliable response to first aid fire attack duties. There are two models the UNI-225 andUNI-450, each available with either (1×3) or (3×6) induction rates, matched for use with aspirating foam branchpipes flowing 225 and 450 L/min at 7 bar g (100psi). These Uniductors™ typically experience a 35-40% pressure drop across the inductor and operate within a recommended pressure range of 5-10 bar g.A simple but positive “twist and click” operation of the control knob allows easy selection of the induction setting for the foam concentrate in use and once selected it is quick to change but cannot be unintentionally moved “offposition”. Each portable Uniductor is fitted with a non-return valve and 1metre long pick-up tube, to allow use with 25 litre foam drums or temporary reservoirs. This also avoids the potential risk of water diluting the foam supply, which can be caused by high back pressures occurring due to poor hose configurations, operating up steep slopes, or mismatching of equipment. Normally supplied with 2½" BS.336 Instantaneous couplings or BSP male threaded connections as standard, but many other connections are available
with Pickup Tube & 50mm BSP Male Fitting
Angus Striker Self Inducing Foam Branchpipe S225/SHS 3-6% Lightweight branchpipe made in Australia for fire brigade and industry. Suitable for use on Class A materials such as forestry and structural fires with Angus Forexpan S foam concentrate as well as Class B foam concentrates. Manufactured from rugged 316 stainless steel with corrosion resistant components, they are suited to onshore, offshore, underground mining and other harsh environmental applications. Suitable for use with Angus Fire inductors.
Fluorine Free Foam Branch Kit consists of a simple foam branch pipe with foam pickup capability and can be customised to work at different pressures. It can used with Fluorine Free foam on fire tankers or as a pick-up nozzle on hose reels. Technical Details Construction : Anodised Aluminum Dimensions : L: 504mm D: 38mm W: 0.55kg Flow : 29 lpm @ 220kPa Induction : 3% Or 6 % proportion option Pressure : 220 to 330kPa** Throw : 5 to 12m (200 kPa to 70kP
In-Line Educator (Aluminum) 375 lpm Flow - 0.25 0.5 1 3 6% Settings - 40mm Male and Female BSP outlets
In-Line Educator (Brass) 360 lpm Flow - 0.5 1 3 6% Settings - 40mm Male & Female BSP outlets
The MADD DOG multiple expansion foam nozzle offers a rugged versatility and performance not found in any other nozzles, With a twist of the wrist the MADD DOG produces low expansion foam (ratio approx. 12:1) with excellent stream projection or medium expansion foam (ratio approx. 30:1) with incredible production. (Quality of water and foam concentrate can effect expansion rates.) MADD DOG's aspirating attachment is constructed of pressure injected polymer resins which make it economical, lightweight, and incredibly rugged. Even with the nozzle attached, the MADD DOG is still less than 8 inches long making it easier to store and use than any of its competitors, The MADD DOG can be used with a variety of nozzles. The opening on the Madd Dog is 2-3/4" in diameter and 1" deep. Nozzles with a smooth non ridged face produce better foam expansion with the Madd Dog.The nozzles listed below has been tested with the Madd Dog and produce excellent results. 1½" 1575 lexan forestry nozzle POK ¾", 1" and 1.5" wildland tips (specify old style bumper) 1.5" Elkhart 205BAF C & S Supply 110/23 1" and 1560/20 1.5" adjustable fog nozzles. Several C & S nozzles have the same size bumpers as the 2 tested. KK 1.5" Twister Made in the U.S.A.
Showing 1–11 of 11 results