Code: HAR Headlamp017

The e+LITE headlamp is designed for any situation. It is ultra-lightweight, comes in a hard case and can easily be stored with its batteries in a backpack, jacket, or emergency kit for up to 10 years. It provides white or red lighting in continuous or blinking mode and can easily be attached with its elastic band and clip. For emergencies, the e+LITE is equipped with a long-range whistle that can signal ones position for rescue. • Color: black and red, red case, black band• Three white LEDs and one red LED• Clip attachment system and removable elastic headband• Light source rotates 360° on ball and joint• Operates with two Lithium CR2032 batteries (included)• Degree of protection: IP 68 (waterproof down to 1m).• 10-year guarantee  

Articulated protector with rollers to guide a moving rope andprotect it from abrasion,• Vertical and horizontal rollers guide the moving rope with a minimum   of rubbing• Each module can be postioned independently to adapt to the terrain• Modules are connected with quick links: the number of modules can   be varied according to the terrain• Sold as a kit: 4 modules + 8 quick links + carry bag• Weight: 1330g ********* 1 ONLY **********

Articulated protector with rollers to guide a moving rope andprotect it from abrasion,• Vertical and horizontal rollers guide the moving rope with a minimum   of rubbing• Each module can be postioned independently to adapt to the terrain• Modules are connected with quick links: the number of modules can   be varied according to the terrain• Sold as a kit: 4 modules + 8 quick links + carry bag• Weight: 1330g ********* 1 ONLY **********

Gemini is a compact double pulley that sets up progress capture systems of high mechanical advantage Special side plates designed for use with prusik friction hitch in progress capture systems Parallel mounted sheaves and auxiliary attachment point for creating different types of hauling systems Sheave mounted on sealed ball bearings for excellent efficiency Compact and lightweight Specifications:  Rope compatibility: 7 to 11mm  Sheave diameter: 25 mm Efficiency: 91 % Maximum working load: 2 x 1,5 kN x 2 = 6 kN Weight: 135 g Certification(s): CE EN 12278, NFPA 1983 Technical Use

Description:Lanyard with fine adjustment system for precise work positioningUsed in double mode on the harness side attachment points to distributethe weight on the belt (user has weight on his feet): length is adjusted by pressing on the pivoting cam.May be used in single mode on the harness ventral attachment point to distribute weight between the waistbelt and the leg loops (user is suspended):length is adjusted by operating the handle while holding the free end of the lanyard Removable protective sheath protects the rope from abrasive contact and enhances rope glide. The protection can be removed for single mode use, to bring the user closer to the anchor. Available in four lengths: 2, 3, 4 and 5m Specifications;• Certification(s): CE EN 358 References: L52H 002• Length: 2 m• Guarantee: 3 year

Description: Easy to use: the fine adjustment system allows length to be precisely adjusted for comfortable positioning at a work station Can be used in two ways:- double mode (on the harness side attachment points) when the user works with weight on his/her feet. This type of attachment ensures better load distribution on the belt. Length is adjusted by pressing on the pivoting cam- single mode, on the harness ventral attachment point, when the anchor is located above the user, so that the load is comfortably distributed between the belt and leg loops. Length is adjusted by operating the handle, while holding the free end of the lanyard Sewn terminations on both ends with plastic sheath to keep the connector in position and protect the rope from abrasion Protective sheath protects the rope from abrasive contact and enhances rope glide. This protection can be removed for single mode use, to bring the user closer to the anchor Specifications: Materials: Nylon, polyester, aluminum Certification(s): ANSI Z359.3, CSA Z259.11, CE EN 358, CE EN 12841 type C, EAC

Designed for rescue: lacks gated attachment hole• Multi-functional handle allows the user to :- unblock the rope and control the descent with the hand on the free end   of the rope- move more easily on horizontal or low-angle terrain, thanks to the button   on the handle- get into position without having to tie off the device• Anti-panic function is engaged if the user pulls too strongly on the handle:   brakes and stops the descent automatically• Anti-error safety catch to reduce the risk of an accident due to incorrect    installation of the device on the rope. The shape of the cam is designed   to improve rope glide when ascending• Pivoting cam facilitates taking up the slack in the rope. Can also be used   to make a reversible haul system, and for short ascents (in conjunction   with a FOOTPRO foot loop and an ASCENSION handled rope clamp)• Lowers heavy loads up to 272 kg (only for expert users)

Smaller Self-braking Descender (for 10-11.5mmØ ropes) with anti-panic function, with multi-function handle that allows descent control, easier movement on inclined or horizontal terrain and positioning at the work station without the need to tie off the device. The anti-panic function only activates if the user pulls too hard on the handle. The I'D S Descender has an anti-error catch to reduce the chance of an accident, and a gate that helps prevent dropping the device and facilitates rope installation when passing intermediate anchors. • Multi-functional handle allows the user to :- unblock the rope and control the descent with the hand on the free end   of the rope- move more easily on horizontal or low-angle terrain, thanks to the button   on the handle- get into position without having to tie off the device• Anti-panic function is engaged if the user pulls too strongly on the handle:   brakes and stops the descent automatically• Anti-error safety catch to reduce the risk of an accident due to incorrect   installation of the device on the rope. The shape of the cam is designed   to improve rope glide when ascending• The safety gate on the moving side plate helps prevent dropping the device   and facilitates installation of the rope when passing intermediate anchors• Pivoting cam facilitates taking up the slack in the rope. Can also be used   to make a reversible haul system, and for short ascents (in conjunction with a    FOOTPRO foot loop and an ASCENSION handled rope clamp)• The locking screw of the swinging side-plate allows the I'D S to be part of a rescue kit• Lowers heavy loads up to 250 kg (only for expert users)• Available in two colors

Description: Can be combined with an ABSORBICA energy absorber to set up an energy-absorbing I or Y lanyard with a maximum length of two meters. Sewn ends protected by plastic sheath to hold the connector in place and protect the ends from abrasion May be used with an MGO OPEN 60 connector with very large gate opening for connection to metal structures or to large-diameter cables and bars Specifications: Certification(s): CE EN 354, EAC Length: 1m Weight: 130 g